Felpro Customer Service Phone Number

Phone Number of Felpro is +1-248-354-7700, +1-800-325-8886, +1 248-354-7700 .
Felpro organization is a subsidized business agent of the Federal Mogul Corporation. This company deals in Engine, Friction, Lighting, Systems protection and Wipers division. In addition, this company mainly focuses on the Gaskets. The company works in cold, hot, dynamic gaskets with better ignition and power distribution. Felpro gaskets are engineered to provide the performance and durability and designed with long-term lightweight engine castings. The Federal-Mogul Corporation has used world-class manufacturing capabilities and global resources for their products and services.
Essential Contact Number of Felpro for General Inquiries
Phone Number: +1-248-354-7700
Important Contact Number of Felpro for General Support
Phone Number: +1-800-325-8886
Additional Contact Number for Additional Information or Know About Felpro
Phone Number: +1 248-354-7700

Felpro Corporation is an American engineer, maker and supplier of Automotive and vehicle security items. The expansive's assortment of items are utilized by various unique hardware producers around the world, and in addition services of car, business, aviation, marine,and mechanical, farming and power-era gear.

Felpro Company's Collection Of Products And Services


  • Felpro plans and makes unique hardware powertrain segments and framework security items in the United States and Internationally, including motor orientation, cylinders, cylinder pins, cylinder rings, Ignition, Bearings, Bushings, Heatshields, Sealing, chamber liners, valve seats and aides, transmission items, specialized materials and connecting rods.
  • For over a century, Felpro has added to the imaginative items that the customers need to deliver the up and coming era of vehicles.
  • In addition to this, Felpro keeps on creating developments to enhance efficiency, decrease discharges and improve solidness through worldwide designing, assembling, distributing and customer administration programs.
  • Felpro products are found in every market lof the World at rebate costs that suits the pockets of the customers.
  • Moreover the Company also offers wide range of automobile products on shipments and home deliveries within same day or next day delivery.
  • The core mission of Felpro Company is to furnish high quality, designed, safe and durable products that ensures the lifelong services to the customers.



Felpro Address


The address of Felpro is 27300 West 11 Mile Road Southfield, Michigan 48034, USA.

Felpro Website


The Website of Felpro is www.federalmogul.com.

Felpro contact person


The contact person of Felpro is Na.

Felpro Customer Support Service Phone Number


The customer support phone number of Felpro is +1-248-354-7700, +1-800-325-8886, +1 248-354-7700 (Click phone number to call).




The postal and official address, email address and phone number (helpline) of Felpro Service Center and Felpro customer service phone number is given below. The helpline of Felpro customer service phone number may or may not be toll free.

Click Here To View Felpro Customer Service Phone Numbers


Felpro Phone Number Customer Service

What was the response after calling on specified numbers? To Write Click Here
If the contact information is incorrect, please let us know Here



View Contact Detail Like Phone Numbers



Felpro Source of Knowledge


www.federalmogul.com/en-us/company/pages/home.aspx
www.federalmogul.com/en-us/contact/pages/home.aspx
www.federalmogul.com

Your Complaint, Suggestion, Complication, Review To Felpro

Message
  
Your Name
Email Address
Your Photo
(Optional)
Screenshot
(Optional)
Gender
Male
Female
Image Text
Customer care captcha

yiptee.com Advertisements


Felpro Customer Service Number Delineated Here With Complaints and Reviews

Customer care male
Mr. Brent Helms CallsApr 26, 2016

Mr. Brent Helms On Phone To Felpro Service
Intake-exhaust manifold gasket, part of the intake gasket goes under the exhaust manifold in two places. Flipping it around just changes the position of where it goes under the exhaust. Can I remove this piece?
1981 Jeep CJ8 258 4. 2L, F_P kit 260-1134. I also have a Victor kit that is designed differently, but does the same as F-P.

Reply
Customer care male
Mr. Brian CallsApr 19, 2016

Mr. Brian On Phone To Felpro Service
Hello i bought a Fel-Pro rear main seal part FEL-2847 and tried to install, but was wrong seal. Package was labeled for my engine, but the seal itself was about a 1/4 to small. Looking at reviews it has happened before. I think someone should look into this so it doesn't happen to anyone else. Tried to post picture of proof, but would not let me post.

Reply
Customer care female
Ms. Kathleen CallsMar 21, 2016

Ms. Kathleen On Phone To Felpro Service
Since your phone number is not easy to find at the Fel Pro website, I found this website with a phone number, but the message says no operator is available. I watched your Use and Mis-Use of Sealers and wish he would have demonstrated how much a dab it. For the third time I'm installing intake manifold gaskets and wish I knew how much a dab was. It would have been helpful for the video to show how much a dab is. Is it a short line of sealant where the gaskets meet or a squirt of sealant. Is a dab 1/2 teaspoon of sealant, 1/4 teaspoon of sealant, a 1/4" bead of sealant?

Also a demonstration of using metal epoxy to even out pits would be helpful, but I understand the liability in that advice. I have a 1992 Buick Century 3. 3.

Reply
Customer care male
Mr. kevin CallsFeb 11, 2016

Mr. kevin On Phone To Felpro Service
HI
We have a 96 escort 1. 9L. Replaced the v/c gskt with a vs50369 and after a year it was leaking again, we pulled it apart and noticed a groove in the v/c that didn't match up to the bead on the gasket. The bead on the gasket has to go down. So we are afraid that its going to leak again, is there any tricks to stopping this gasket from leaking?.

Reply
Customer care male
Mr. Karl Paes CallsDec 10, 2015

Mr. Karl Paes On Phone To Felpro Service
I have a 2005 tj 2. four and need information on properly installing the bs40627 rear main seal. On the internet I discovered that some say, flat side out, or flat side in or the vinyl installation tool is just there for shipping purposes. The instruction paper that comes in the box is very vague and there is no illustration.

Reply
Customer care male
Mr. Robert Moseley CallsNov 01, 2015

Mr. Robert Moseley On Phone To Felpro Service
Continual problems with your timing cover gasket for small block mopars. The gasket material breaks down around the water connections causing leaks your lucky if it lasts a year. I have switched to the mopar gasket and have had no problems since. Also your timing cover set tcs6563-1 has the incorrect front oil pan large rubber seal should match what is in you overhaul set. I am not sure what your quality control department is doing to check that consumers are getting the best possible gasket are is this a cost saving issue. Thank you, Robert Moseley .

Reply
Felpro Customer Service Care Phone Number 232211
Ms. Ariele CallsJul 12, 2015

Ms. Ariele On Phone To Felpro Service
I have purchased three valve cover gasket sets, and only two out of eight gaskets have actually fit the mold of my vehicle. At first I thought it was coincidence because the first box that I had purchased had one gasket that fit and the other that was just barely to big, but just big enough that whem we were reinstalling the gasket, part of it slipped out of the grove and was cut in half by the cover. Doing the cover a second time I had to purchase two more gasket sets and in one box both gaskets were way to large, and in the second set one gasket fit and the other one is once again to large. The Product is VS 50461 R. I live 40 minutes away from the nearest parts store, so it is really a huge inconvenience to find out half way through the job that the part is not going to fit.

Reply
Customer care female
Ms. Katrina Howard CallsMay 20, 2015

Ms. Katrina Howard On Phone To Felpro Service
Ordered VS50396R1 twice and incorrect quantity of gaskets in packaging. Information shows six gaskets and six orings. six orings and one gasket were sent both times.

Reply
Customer care female
Ms. Bonne Hofstetter CallsMay 13, 2015

Ms. Bonne Hofstetter On Phone To Felpro Service
We purchased a Gasket intake manifold set m598011t-1 from our Napa dealer and when my son opened it on Sunday some of the gaskets where missing and the box had never been opened. This caused us to have to keep a rental car longer then expected and cost more money then i wanted to spend, but we had to reorder the parts and got them too. and now we have to wait till this weekend for my son to be able to finish putting our van back together. we didn't expect to have to pay for a rental for a week. my son has no garage to work in and her works, which means it gets done on the weekends, which he couldn't finish doing without those gaskets. what was missing was valve cover set intake manifold isolator grommets. maybe your boxes need to be checked a little closer.

Reply
Customer care male
Mr. Lonnie Peck CallsApr 24, 2015

Mr. Lonnie Peck On Phone To Felpro Service
I bought a one piece rubber oil pan gasket for a chevy 350 engine. The gasket melted on both sides where the dipstick goes through the gasket. Then the chunks of gasket got on the pickup screen of the oil pump which plugged up the screen. In return caused the oil pump to not get oil. In return blew up my brand new engine. Ive never seen this happen or ever heard of it. Very dissatisfied with this product. Definitely will never use this again.

Reply
Customer care male
Mr. WMBROWNING Says Oct 06, 2015

I have seen this happen before. What i do is take a piece of stainless steal screen and wrap it around the bottom of the sump pump with a piece of stainless steal wire holding it on. Problem solved, new engine saved. I hope this helps . Yours truly from; w. Am. Browning.

Reply
Customer care male
Mr. Kenneth CallsFeb 25, 2015

Mr. Kenneth On Phone To Felpro Service
I have put two head gaskets in a 1999 Mazda 626 and both gasket have failed i have check block for warpage and the head has been serviced by machine shop.

Reply
Customer care user complaints